![Avanti Magnesium Plates Avanti Magnesium Plates](https://cdn11.bigcommerce.com/s-jt4zei5wcn/images/stencil/300x300/products/508/931/AVANTI-MG--2__94161.1655153174.jpg?c=1)
The Sure-Grip Avenger Magnesium plate is a 45 degree double action plate with adjustable pivots. Originally designed for short track speed skating but re-imagined for Roller Derby in the early 2000's. Lightweight Magnesium plates, white powder coated, DA45 black aluminum trucks with steel hardened 8mm axles, hollowpoint kingpins, Sure Grip Purple 85a Super Cushions (4 barrel & 4 conical), and a rubber Carrera toe stop. Includes axles nuts and mounting hardware.
**Sold in pairs** with 8mm axles, but 7mm is available upon request.
Cushions:
The DA45 truck is very unique when compared to other trucks on the market. Due to its extreme angle it must use a special set of cushions, one “barrel” and one “conical” cushion. We developed a special urethane with 4 different hardness levels to fine tune the action of your skate. Blue – 72A Yellow – 79A Purple – 85A Red – 93A
Pivot adjustment:
Pivot pins are not factory adjusted. Always adjust the pivot pins so that the ball just touches the bottom of the Delrin pivot cup. The pivot pin adjustment should be checked regularly once installed. Do not assume the pivot pin adjustment is correct if no movement is felt when checking the adjustment. It could be adjusted longer than necessary. Pivot pins adjusted too long can cause the skate to have an unpleasant “darting” feel when skating. If the pivot pin ball does not touch the pivot cup you will be able to press down on the truck assembly and feel or see a slight movement of the pivot pin into and out of the cup. Adjust the pivot pin until the pressure applied to the truck no longer results in this movement. When satisfied that the pivot pin is resting with slight pressure in the pivot cup, secure the pivot pin lock nut firmly against the truck housing. NEVER skate your plates with the pivot pin lock nuts improperly tightened. Loose pivot pins will self-adjust and possibly damage the threads in the trucks.
Tips for tuning your action. 1) Remember a stiff action may make a skater feel more stable initially, however, it has several adverse side effects. The most important one to consider is the amount of force needed to make the skate do what you want it to do. The stiffer the action, the harder you need to work to get the skate to turn. This effort can lead to premature wear or failure of boots or worse, your feet. A simple rule of thumb. The stiffer the action, the more the SKATE controls where you are going. The softer the action, the more YOU control where you are going. How is that again? You say you have experienced a loose action behave like it has a mind of its own?? Not so. The skate is simply going where you tell it to go and you are over correcting. The more you over correct, the more erratic the skating becomes. 2) The DA45 action turns more quickly and easily than any other design on the market. It will go exactly where you tell it.
Avenger Plate Length:
Size 0 - 205mm
Size 1 - 215mm
Size 2 - 225mm
Size 3 - 235mm
Size 4 - 245mm
Size 5 - 255mm
Size 6 - 265mm
Size 7 - 275mm
Size 8 - 285mm